Air Injection Blowers
SIAV & VTB Three Lobe Series
(complete brochure)- Flows of 100-9000 m3/h (59-5294 cfm)
- Pressure to 1 bar (14.5 psig) gauge
- Vacuum to 80 mbar abs (24 “Hg)
- Air-cooled.
- Tri-lobe construction to reduce pulsations, noise level and vibrations.
- Five bearings standard with drive shaft suitable for V-belt and direct drives.
- Helical gears located on the drive end for more input torque capability.
- Oil lubrication and large oil sumps to improve bearing life.
- No need for vacuum relief valve. Can operate even with blanked inlet.
- High vacuum and efficient on wet and dry products.
SIAV 8902
(complete brochure)- 6500 cfm and 27" Hg
- 5-Bearing design
- No vacuum relief valve required
- Runs cooler lasts longer
Bareshaft Blowers
S2H Two Lobe Series
(complete brochure)S2H22>S2H52 series
- Pressures to 1 bar g.* (14.5 psig)
- Flows from 35 m3/h (20 cfm) to 1150 m3/h (675 cfm)
- Vacuum to 500 mbar abs (15 “Hg)
- Two lobe construction
- Four bearings standard with drive shaft suitable for V-belt and direct drives.
- Bearing life : 50,000 hours.
- Available in 50 mm (2“), 75 mm (3“), 100 mm (4“) and 125 mm (5“) gear sizes.
S2H63>S2H84 series
- Flows from 1300 m3/h (765 cfm) to 10 000 m3/h (5882cfm)
- Pressures to 800 mbar g.* (11.6 psig)
- Vacuum to 500 mbar abs (15 “Hg)
- Two lobe construction
- Vertical / Horizontal interchangeability.
- Four bearings standard with drive shaft suitable for V-belt and direct drives.
- Piston rings and labyrinth seals.
- Bearing life : 50,000 hours.
- Available in 150 mm (6“) and 200 mm (7“ 7/8) gear sizes.
Drybulk Truck Blowers
Truckstar Series
(complete brochure)- Flows of 1100-1700 m3/h (647-1000 cfm)
- Pressure to 1.2 bar (17.4 psig) gauge
- Vacuum to 500 mbar abs (15 “Hg)
- Tri-lobe construction with pulsation control ports for smoother operation.
- Clockwise and anti-clockwise rotation.
- Oil splash lubricated bearings and large capacity sumps.
- Double ring feder and gear retainers for more input torque capability.
- Heavy duty casting ribbed for rigidity and noise attenuation.
- Built-in melting plugs for temperature protection.
Truckstar MV-18
(complete brochure)- 18" Hg vacuum is standard
- Tri-seal shaft sealing system
- Centrally timed
- Robust road tested design
- Washdown protection package
- Radiant cooled ribbed gear case. No cumbersome heat shield required.
- Rugged bulls eye sight glasses
FLOWUSA Inc. Phone: 1-877-FLOWUSA
Home - Products - Contact Us